|
Pace Timer - 2.3" 4-Digit 2-line (100' viewing)
|
| |
|
Quantity in Basket:
None
Code: AF-2720-101
Price: $895.00
Shipping Weight: 15.00 pounds
Voltage:
120VAC
Cut sheet:
AF-2720-101.pdf
Manual:
PB-2149-478.pdf
Nema Rating:
Nema-1
Features:
Serial communications, Optically isolated inputs
|
| |
Main Power: 120VAC / 60Hz
Input level: 12Volt contact closure
Digits: Uses 7-segment LED configuration
Std Color: High Efficiency Red and Green
LED Life: 100,000 Hours (~11.4 years) typical
Unit Dimensions: 15" tall by 11" wide by 3.5" deep
What is a Production Pace Timer, and how is it used?
The Production Pace Timer (PPT) is a special purpose numeric marquee designed to pace the production rate of any manual process. Each line of the marquee is a four-digit counter constructed from 2.3” LED display modules providing visibility up to 130 feet.
The GOAL line automatically counts at a user programmable time interval indicating how many units of production are expected. The ACTUAL line of the marquee counts in response to an input, compatible with most photo-eyes, whisker switches, and palm switches, indicating how many units of production have actually been completed. Four count logic inputs are provided allowing the PPT to monitor multi-lane production lines with up to four lanes. For applications where bad parts need to be subtracted from the running actual count, the fourth count input can be configured to decrement the actual counter instead of incrementing it.
The GOAL and ACTUAL counters may be independently reset. Reset inputs are provided for connection to a controlling device, or the operator may reset either counter via the front panel keypad. The GOAL timer may be paused to stop the GOAL counter from automatically incrementing during breaks. A HOLD input is provided for connection to a controlling device, or the operator may hold the GOAL timer via the front panel keypad.
The 2720 Production Pace Timer has serial capabilities for communications via PC COM port interface for monitoring and/or control of unit (with free supervisory program PD-2116-051). This is helpful when management and supervisors require real-time data of the processes and assembly lines.
Customer is required to run the necessary inputs for use. Wiring is 12 volt contact closure between Gnd and each individual input via screw terminal connectors within the PPT housing. AC power wiring (6 foot power cable) is provided for convenience. Four holes in rear of cabinet are provided for wall mounting applications.
An optional Red / Green stack light (KT-2764-071) can be provided at the customers option. The PPT can be configured to illuminate the stack lights green when production output is within programmed tolerances, or illuminate red when production output falls outside programmed tolerances. The PPT can also be configured to flash the red light when output falls further outside programmed tolerances.
|
Related Item(s)
|
Code
|
Name
|
Price
|
Availability
|
|
|
AF-2450-051
|
Installation Kit--MANUAL count increment for PPT
|
$200.00
|
|
|
KT-2764-031
|
Installation Kit--AUTOMATIC photo-eye increment of PPT
|
$390.00
|
|
|
KT-2764-071
|
PPT Accessory--LED Tower Light
|
$100.00
|
|
|
PD-2116-051
|
PPT Accessory--Supervisory Program
|
$0.00
|
|
|
